毕业论文

当前位置: 毕业论文 > 外文文献翻译 >
  • 低成本纤维缠绕机的设计英文文献和中文翻译

    AbstractIn general, the composite pipes are fabricated using glass fiber and polyester resin matrix by hand lay-up and also by 2-axis fil-ament winding machine. In this work, a filament winding machine was designed and developed for the f...

  • 异型件缠绕成型的研究英文文献和中文翻译

    Abstract A theory of composite material patch winding is proposed to determine the winding trajectory with a meshed data model. Two dif-ferent conditions are considered in this study. One is Bridge condition on the concave surface and the ot...

  • 机械三维标准件库的研究英文文献和中文翻译

    ABSTRACT: Mechanical standard part library is an important means for sharing mechanical standard part resource, it based on ISO part library standard by which mechanical standard parts library information should be rational expressed and exc...

  • Pro/E的模具标准件库英文文献和中文翻译

    Abstract The topic carries out development of die sets standard parts library according to China Die Mould Engineering Canon .Parametric solid models are built based on Pro/E, the family table library of standard parts is established using t...

  • 在恒载作用下破坏时的再分配的方法论英文文献和中文翻译

    Damage Identification Based on Dead Abstract: A new method for damage identification in large, massive civil structures is presented, which is based on the idea that dead load is redistributed when damage occurs in the structure. The method...

  • 液压系统英文文献及中文翻译

    Hydraulic system Hydraulic Pump Station also known as the stations are independent h- ydraulic device. It requested by the oil gradually. And controlling the hydraulic oil flow direction, pressure and flow rate, applied to the mainframe and...

  • 辅机试验台液压系统设计任务书

    一、毕业设计(论文)内容及要求(包括原始数据、技术要求、达到的指标和应做的实验等) 1 提供条件: 计算机,三自由度试验台技术要求。 2 设计内容与要求: (1) 调研收集分析有关...

  • 电气系统的可编程序控制器英文文献和中文翻译

    Programmable designed for electro-pneumatic systems controller Abstract This project deals with the study of electro-pneumatic systems and The programmable controller that provides an effective and easy way to Control the sequence of the pn...

  • 冷弯成形过程的数值模拟英文文献和中文翻译

    abstract3D finite element analysis is employed to simulate a cold roll-forming process. Numericalresults of longitudinal strains and displacement trajectories are compared with experimen-tal results available in the literature. Through a pa...

  • 三维有限元数值模拟深基坑防渗降水英文文献和中文翻译

    FINITE ELEMENT NUMERICAL SIMULATION OF THREEDIMENSIONAL SEEPAGE CONTROL FOR DEEPFOUNDATION PIT DEWATERING Abstract: For deep foundation pit dewatering in the Yangtze River Delta, it is easy to make a dramatic decrease of the underground wat...

  • 首页
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 下一页
  • 末页
  • 85848